Self-Test A-1.5: Describe Emergency Equipment and Facilities
Complete Self-Test A-1.5 and check your answers.
- Panic buttons are installed so that equipment can be shut down in an emergency.
- True
- False
- Besides fire alarm pull stations and fire extinguishers, what other fire control systems should you know the location of when working in a shop?
- Fire exits
- Direct phone lines
- Computer equipment
- Emergency shutdown locators
- Why are emergency showers available at some work sites?
- For use after work
- In case you didn’t have time to shower at home
- To clean tools that have been splashed with corrosives
- To wash off accidental spills or splashes of hazardous materials
- What is one of the first things a worker should do when starting work on a new job site?
- Locate the clock.
- Locate your buddy.
- Locate the lunchroom.
- Locate all emergency shut-offs.
- When working in a shop, which of the following should you familiarize yourself with?
- Location of fire alarm pull-station
- Location and class of fire extinguishers
- Fire drill procedures and muster points
- All of the above
- Where are the minimum standards of job site first-aid facilities described?
- WorkSafe OHS Regulation
- National Building Code
- Workers Compensation Act
- National Fire Protection Code
- Permanent electrical services must be authorized for use by the regulating authority.
- True
- False
- The area in front of an emergency exit may be an ideal place to store materials until the exit is required for use.
- True
- False
- First aid phones should require the user to dial 911 to prevent accidental calls and false alarms.
- True
- False
- If there is an accident with the gas utilities, the proper procedure is shut off the gas and then report to your supervisor as soon as safely possible.
- True
- False
- You are required by law to use a fire extinguisher to fight a fire regardless of the fire’s development.
- True
- False
Answer Key: Self-Test A-1.5 is on the other page.